| SPECIFICATIONS |
|
|
|
| Input Connectors |
1/4″ TRS, female XLR (pin 2 hot) |
|
|
| Input Type |
Electronically balanced/unbalanced, RF filtered |
|
|
| Input Impedance |
Balanced 40k ohm, unbalanced 20k ohm |
|
|
| Max Input |
>+21dBu balanced or unbalanced |
|
|
| CMRR |
>40dB, typically >55dB at 1kHz |
|
|
| Output Connectors |
1/4″ TRS, male XLR (pin 2 hot) |
|
|
| Output Type |
Impedance-balanced/unbalanced, RF filtered |
|
|
| Output Impedance |
Balanced 100 ohm, unbalanced 50 ohm |
|
|
| Max Output |
>+21dBu balanced/unbalanced into 2k ohm or greater; >+18dBm balanced/unbalanced (into 600 ohm) |
|
|
| Bandwidth |
20Hz to 20kHz, +0.5/-1dB |
|
|
| Frequency Response |
<10Hz to >50kHz, +0.5/-3dB |
|
|
| Dynamic Range |
108dB |
|
|
| Signal to Noise Ratio |
90dB |
|
|
| THD+Noise |
<0.004% |
|
|
| Interchannel Crosstalk |
<-80dB, 20Hz to 20kHz |
|
|
| Bypass Switch |
Bypasses the graphic equalizer section in the signal path |
|
|
| Low cut Switch |
Activates the 50Hz 12dB/octave high-pass filter |
|
|
| Range Switch |
Selects either +/- 6dB or +/-12dB slider boost/cut range |
|
|
| Operating Voltage |
100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz |
|
|
| Power Consumption |
15W |
|
|
| Power Connector |
IEC receptacle |
|
|
