Name: PMS-16BLT
SKU: 4312
Price: 1700.00 UAE
Availability: InStock

Description

Microphone Input

Balance X2R socket to receive various low level microphone signals

Line Input

Non- balanced socket,receiving various unbalanced or balanced high
level voice tip signals.

Channel Peak Display

When the channel signal is clipped due to too high lift, the indicator
lights up to prompt DJ to make adjustment

Gain Control

Adjust this knob to increase or decrease channel level from -60db to
-16db

Channel Signal Switch

Press this key to attenuate the channel signal by 20dB.

Treble Control

Adjust the knob to control channel treble tone.

If Tone Control

Adjust the knob to control the channel mid range tone.

Bass Control

Adjust the knob to control the channel bass tone

Auxiliary Knob

Adjust the auxiliary knob to enter the specified equipment as required
for the channel signal,without affecting the mixed amplification signal.

Insert Adjustment For
Internal Effect

Adjust the knob to allow the channel signal to enter the effector.

Balance Control

Adjust knob , can make the left , in the channel distribution as required , make it to deal stereo effect.

Channel Monitering
switch

Press this button, the channel can be monitored by headphones.

Channel Volume
Attenuation Driver

Adjust the push, can control the channel signal size, to match the overall performance.

Main Output Section

Output status display

It can be used to display the main channel out put directly and make
the adjustment reach the ideal state

Internal Balance

The equalizer can adjust each frequency band according to the needs
in order to achieve ideal syllables.

Stereo main sound
Attenuation promoter

By adjusting the driver, you can make the main output level meet the
ideal requirement state.

Internal Effect
Monitoring Section

Recording Out PUT Knob

Adjust the knob, you can adjust the size of recording signal as needed, to the ideal state.

Auxiliary Send Level Adjustment

The level of the control auxiliary send is turned off to the interface of the external calling device.

Auxiliary Return Level Regulation

Control the return level of the external signal, and reach the ideal state of the mixing of the generator signal and main channel signal.

Signal Adjustment For Internal Effect

Adjust the knob so that the input signal can be added to the effector as required.

Digital Effect Display

Adjust UP and DOWN buttons to achieve ideal reverb effect state according to your needs. This function displays 16 levels effect state for adjustment.

Loop Back Adjustment Of Internal Effect

By adjusting the knob, the loop signal of the internal effect can reach the ideal state.

Internal Effect Balance Control

Adjust the knob, can make the effect in the machine according to the requirments of distribution, into the left , right sound channel.

Internal Effect Monitoring Switch

Press the button to use the effect signal in the earphone monitor.

In Machine Effect Attenuation Push

By adjusting the driver , you can control the output level of the effect signal.

Headphone Monitor Volume Adjustment

By adjusting the knob, the volume of the head phone can be adjusted.

Headphone Socket

Stereo headphone connection jack can monitor the output of stereo, mono, marshalling and first output channel.

Bluetooth

Bluetooth receiver

Rear Panel

power switch

Speaker Out

4 speaker outs 2 mono and 2 speakon outs

Channel	16 Channel
Power RMS WATTS	500×2=1000W
Power pmpo watts	2000×2=2000W
Total Harmonic Distortion	0.1% below (1KHX Full Power)
Power Requirements	AC 220/50Hz or 120V/60Hz
Impedance	8Ω